Hydraulic & Pneumatics -- JADE SCREEN ENTERPRISE CO.,LTD. PNEUMATIC TURBINE VIBRATORS

Hydraulic & Pneumatics

/ HOME

/ Add Favorite

/ 中文

Category Menu

PNEUMATIC TURBINE VIBRATORS

Home > Featured Products

PNEUMATIC TURBINE VIBRATORS

Series T


Maximum temperature 140°C=280°F Noise level range 65 to 80 dBA	1. Hard anodised aluminium alloy body 2. Turbine rotor 3. Aluminium = light weight 4. Brass = heavy weight 5. Ball-bearings	6. Plastic endplate with thread 7. Nylon endplate 8. Accelerator grooves 9. Air inlet 10. Air exhaust 11. Base Mounting's holes

DESCRIPTION

A low speed range and large working moment are combined in these vibrators to produce a powerful vibration with a high amplitude.

The body is machined from an aluminium extrusion which is tempered and hard anodized. It is chemically resistant and suitable for use in the food and pharmaceutical industries.

The LP-vibrators (Low Pressure) works most economically between 30 and 60 PSI while the HP-vibrators (High Pressure) shows the best results between 60 and 80 PSI. In this range the frequency of vibration can be varied by regulation of the air pressure, thus enabling the vibrator to be tuned to suit the application.

These pneumatic turbine vibrators have a low noise level. The noise measured in the proximity of the silencer may be reduced to half when an exhaust hose is used.

Design

The vibration is produced by the centrifugal force of the rotor which has a large excentric moment. The rotor is supported on two heavy duty bearings which ensure a long working life even when used at maximum speed.

INSTALLATION INSTRUCTIONS

An air line filter and lubricator must be used to guarantee a long working life of the bearings. A hydraulic oil ISO VG5 = 5 cSt/40°C must be used, for example SHELL Tellus Oil C5. The recommended mounting bolts should be grade 5 or better.

The surface into which the vibrator is to be mounted should be absolutely flat — mounting the vibrator to an uneven surface may distort the vibrator body and cause the turbine to give less than designed performance.

PERFORMANCE DATA

Model	Frequency V.P.M.			Centrifugal force measured						Air consumption / Minute
	2 Bar 29 PSI	4 Bar 58 PSI	6 Bar 87 PSI	2 Bar = 29 PSI		4 Bar = 58 PSI		6 Bar = 87 PSI		2 Bar = 29 PSI		4 Bar = 58 PSI		6 Bar = 87 PSI
	2 Bar 29 PSI	4 Bar 58 PSI	6 Bar 87 PSI	N	LBS	N	LBS	N	LBS	Ltr.	CF	Ltr.	CF	Ltr.	CF
T-50/LP	17000	21500	23000	700	157	1240	279	1710	385	67	2.4	115	4.0	165	5.8
T-50/HP	11000	14500	16500	600	135	1020	230	1350	304	79	2.8	140	4.9	198	7.0
T-65/LP	9500	13000	15000	770	173	1380	310	1800	405	89	3.1	157	5.5	236	8.3
T-65/HP	8500	10500	12000	1300	293	2050	461	2600	585	108	3.8	193	6.8	290	10.2
T-80/LP	9000	11500	13000	1840	414	2960	666	3790	853	150	5.3	260	9.2	385	13.6
T-80/HP	6800	9000	10500	2000	450	3470	780	4740	1066	NA	NA	260	9.2	385	13.6
T-100/HP	6500	9000	10000	2480	558	4800	1080	6060	1364	NA	NA	300	10.6	430	15.2

Data obtained with aKistier 3-Axis Dynamometer on a heavy laboratory test block and displayed by a Kistler control monitor (COMO).
Frequency and force will decrease on a less rigid mounL
We reserve the right to improve, modify or withdraw specifications or products without notice or obligation.

DIMENSIONS

*will accept NPT

Model	A		Width		C		D		E		F		G* Thread BSP	H* Thread BSP	Weight
Model	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	G* Thread BSP	H* Thread BSP	kg	Lbs
T-50/LP	50	1.97	46	1.81	86	3.38	68	2.68	12	0.47	7	0.27	1/8"	1/4"	.385	.86
T-50/HP	50	1.97	60	2.36	86	3.38	68	2.68	12	0.47	7	0.27	1/8"	1/4"	.520	1.15
T-65/LP	65	2.56	50	1.97	113	4.45	90	3.54	16	0.63	9	0.35	1/4"	1/4"	.735	1.60
T-65/HP	65	2.56	64	2.52	113	4.45	90	3.54	16	0.63	9	0.35	1/4"	1/4"	.975	2.15
T-80/LP	80	3.15	56	2.20	128	5.04	104	4.09	16	0.63	11	0.43	1/4"	3/8"	1.210	2.70
T-80/HP	80	3.15	70	2.75	128	5.04	104	4.09	16	0.63	11	0.43	1/4"	3/8"	1.560	3.45
T-100/HP	100	3.94	67	2.64	160	6.30	130	5.12	20	0.79	13	0.51	3/8"	3/8"	2.270	5.00

Brand :	JADE SCREEN ENTERPRISE CO.,LTD.	Tel :	886-2-2762-9850 , 2764-0102
Fax :	886-2-2768-8905 , 2765-2007	Email :	jade.screen@msa.hinet.net
URL :	http://www.jadescreen.com.tw	Address :	5F., No.11, Alley 5, Lane 389, Sec. 5, Nanjing E. Rd., Songshan District, Taipei City 105, Taiwan (R.O.C.)
Product :	Pneumatic Vibrators for Industry, Industrial-Use Pneumatic Vibrators

	Copyright © IENET Media Taiwan　 E-mail:service@ienet.com.tw TEL：886-2-2395-1200